 |
 |
Print Page |  |
Online Downloads |
Spring Press Fastener |
||
 |
 SEW-ON S-SPRING series |
|
Electroplating-plated full set with brass made; 4 holes & 6 holes type sewing spring press avaliable, widen applicate for outerwears such as sweaters jacket, handbags and belts...etc. Snap closures are a wonderful alternative to buttons or zippers, especially in garments that need to be put on and taken off easily. The most common snap closures are sew-on snaps, snap tape and no-sew snaps. The type of snap closure you use will depend on your garment type. |
||
| How to use: | ||
| Step 1: Determine the placement of your snap closure. If you're working from a sewing pattern, the pattern instructions will tell you where to place the snap. | ||
| Step 2: Thread a sewing needle and knot the thread end. | ||
| Step 3: Apply the ball portion of the snap to the inside hemmed edge of the fabric layer that will overlap the other. | ||
| Step 4: Hold the ball portion of the snap in place, and bring the threaded needle down through one of the holes along the outer edge of the snap. | ||
 |
||
 |
Find our Recommendation of pre-qualify garment factories | |
 |
Enjoy the privilege Offers & Rewards | |
 |
||
| Article Code: SSPS | ||
| Diameter: 10mm, 12mm, 14mm, 15mm, 17mm, 19mm, 21mm, 23mm, 25mm & 30mm | ||
Tips & Warnings |
||
| Use sew-on snaps to secure the overlapping edges of a garment where an invisible closure is desired and where no tension will be placed upon the closure. For example, snaps can be spaced in between the buttons on a blouse to keep the blouse front lying flat. | ||
| You may also be interested in the following items: | |||||
 |
 |
||||